LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Weatherstrip/Seals >> Side Rail Weatherstrip/Retainer >> Removal

Side Rail Weatherstrip/Retainer: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the windshield weatherstrip retainer. (Refer to BODY/WEATHERSTRIP/SEALS/WINDSHIELD A-PILLAR WEATHERSTRIP/RETAINER - REMOVAL) .
  2. Remove the two screws.
  3. Using a trim stick C-4755 or equivalent, release the push in fasteners and remove the weatherstrip.
scientia non olet · About LEMON Manuals