LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Weatherstrip/Seals >> Cowl/Plenum Window Baffle Seal >> Installation

Cowl/Plenum Window Baffle Seal: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seal against the upper flange of the inner plenum window below the cowl/plenum seal and seat fully.
  2. Install the cowl grille. (Refer to BODY/EXTERIOR/COWL GRILLE - INSTALLATION) .
scientia non olet · About LEMON Manuals