LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Weatherstrip/Seals >> Cowl/Plenum Seal >> Installation

Cowl/Plenum Seal: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Seal should not be touching the plenum baffle flange seal.
  1. Position the seal on the plenum flange and seat fully.
  2. Install the cowl grille. (Refer to BODY/EXTERIOR/COWL GRILLE - INSTALLATION) .
scientia non olet · About LEMON Manuals