LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Swing Gate >> Stabilizer Wedge/Insert >> Installation

Stabilizer Wedge/Insert: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stabilizer insert with the narrow end toward the rear of the vehicle and install the bolts.
  2. Tighten the bolts to 9 N.m (80 in. lbs.).
  3. Install the stabilizer cup and loosely install the bolts.
  4. Adjust the stabilizer and tighten the bolts to 9 N.m (80 in. lbs.). (Refer to BODY/SWING GATE/STABILIZER WEDGE/INSERT - ADJUSTMENTS) .
scientia non olet · About LEMON Manuals