LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Swing Gate >> Lock Cylinder >> Installation

Lock Cylinder: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the lock cylinder.
  2. Install the screw and tighten to 6 N.m (50 in. lbs.).
  3. Install the lock cylinder switch and retaining clip.
  4. Install the exterior handle. (Refer to BODY/SWING GATE/EXTERIOR HANDLE - INSTALLATION) .
scientia non olet · About LEMON Manuals