LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Swing Gate >> Latch Striker >> Installation

Latch Striker: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Adjust the swing gate as necessary. (Refer to BODY/SWING GATE/SWING GATE - ADJUSTMENTS) .
    NOTE: If the spare tire is removed then add 3 mm on the right side to compensate for sag after the spare tire is installed.
  2. Install the striker and install the bolts.
  3. Adjust the striker.
scientia non olet · About LEMON Manuals