LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Swing Gate >> Flip-Up Glass Latch >> Installation

Flip-Up Glass Latch: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the latch assembly.
  2. Install the nuts and tighten to 12 N.m (9 ft. lbs.).
  3. Connect the electrical connectors.
  4. Adjust the latch to achieve the best glass fit. (Refer to BODY/SWING GATE/FLIP-UP GLASS - ADJUSTMENTS) .
  5. Install the trim panel. (Refer to BODY/SWING GATE/TRIM PANEL - INSTALLATION) .
scientia non olet · About LEMON Manuals