LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Sunroof >> Sunshade >> Removal

Section 504 (Body - Interior & Exterior): Sunroof: Sunshade: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove glass assembly from the sunroof assembly. (Refer to BODY/SUNROOF/GLASS PANEL - REMOVAL) .
  2. Remove two screws from trough assembly. See Figure.
  3. Remove trough assembly.
  4. Slide the sunshade forward to disengage the guide feet from the tracks through the cutouts at the front of the tracks.
CAUTION: Use care not to crease the sunshade when removing or installing.