LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Sunroof >> Sunshade >> Installation

Section 504 (Body - Interior & Exterior): Sunroof: Sunshade: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place sunshade into position, through the cutouts at the front of the tracks and slide the sunshade back.
  2. Place trough assembly into position on sunroof module and install the screws.
  3. Install the glass panel. (Refer to BODY/SUNROOF/GLASS PANEL - INSTALLATION) .
scientia non olet · About LEMON Manuals