LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Sunroof >> Control Switch >> Installation

Control Switch: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the switch in the overhead console assembly. Be certain the switch is securely snapped in place.
  2. Connect the sunroof control switch electrical connector. Be certain the switch connector is securely snapped in place.
  3. Install the overhead console (Refer to ELECTRICAL/OVERHEAD CONSOLE - INSTALLATION) .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals