Seat Back Cover - Rear: Removal
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear seat back. (Refer to BODY/SEATS/SEAT BACK - REAR - REMOVAL) .
- Remove the screws and remove the center seat belt guide.
- Remove the screws and push pin fasteners and remove the latch handle bezel.
- Remove the head rest and remove the guide covers. (Refer to BODY/SEATS/HEADREST - REMOVAL) .
- Remove the screws and remove the grocery hooks.
- Remove the push pin fasteners and remove the seat back panel.
- Disconnect the j-straps.
- Remove the seat back cover.