LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Seats >> Seat Back Cover - Rear >> Installation

Seat Back Cover - Rear: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat back cover and connect the j-straps.
  2. Install the seat back panel and install the push pin fasteners.
  3. Install the grocery hooks and install the screws.
  4. Install the head rest guide covers and install the head rest. (Refer to BODY/SEATS/HEADREST - INSTALLATION) .
  5. Install the latch handle bezel and install the screws and push pin fasteners.
  6. Install the center seat belt guide and screws.
  7. Install the rear seat back. (Refer to BODY/SEATS/SEAT BACK - REAR - INSTALLATION) .
scientia non olet · About LEMON Manuals