LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Seats >> Rear Seat Back Latch Striker >> Installation

Rear Seat Back Latch Striker: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the striker and install the bolts.
  2. Tighten the bolts to 35 N.m (26 ft. lbs.).
  3. Install the quarter trim panel. (Refer to BODY/INTERIOR/QUARTER TRIM PANEL - INSTALLATION) .