LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Seats >> Folding Rear Seat Back Latch/Lock >> Installation

Folding Rear Seat Back Latch/Lock: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the latch/lock assembly and install the bolts.
  2. Tighten the bolts to 28 N.m (21 ft. lbs.).
  3. Connect the shoulder belt release cable.
  4. Install the rear seat back cushion. (Refer to BODY/SEATS/SEAT BACK CUSHION/COVER - REAR - INSTALLATION) .
scientia non olet · About LEMON Manuals