LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Interior >> A-Pillar Trim And Grab Handle >> Removal

A-Pillar Trim And Grab Handle: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a small pry tool or equivalent, remove the grab handle trim plugs.
  2. Remove the two grab handle screws.
  3. Remove the grab handle and a-pillar trim from the a-pillar.
scientia non olet · About LEMON Manuals