LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Hood >> Latch Release Handle >> Installation

Latch Release Handle: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the hood release cable to the handle.
  2. Install the handle and install the three screws.
  3. Install the cowl trim cover. (Refer to BODY/INTERIOR/COWL TRIM COVER - INSTALLATION) .
scientia non olet · About LEMON Manuals