LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Hood >> Hinge >> Installation

Section 504 (Body - Interior & Exterior): Hood: Hinge: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position hinge on vehicle and align reference marks.
  2. Install bolts attaching hinge to body and tighten to 28 N.m (21 ft. lbs.).
  3. Install nuts attaching hinge to hood 12 N.m (9 ft. lbs.).
  4. Install hood hinge support cylinder. (Refer to BODY/HOOD/SUPPORT CYLINDER - INSTALLATION) .
scientia non olet · About LEMON Manuals