LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 503 (Lubrication & Maintenance) >> Towing >> Standard Procedure - Towing >> Two Wheel Drive Towing-Front End Lifted

Two Wheel Drive Towing-Front End Lifted

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Many vehicles are equipped with air dams, spoilers, and/or ground effect panels. To avoid component damage, a wheel-lift towing vehicle or a flat-bed hauling vehicle is recommended.
  1. Attach wheel lift device to rear wheels.
  2. Place the transmission in neutral.
  3. Raise the rear of the vehicle off the ground and install tow dollies under rear wheels.
  4. Attach wheel lift device to front wheels and raise vehicle to towing position.
  5. Attach the safety chains.
    CAUTION: Do not use steering column lock to secure steering wheel during towing operation.
  6. Turn the ignition switch to the OFF position to unlock the steering wheel.
  7. Secure steering wheel in straight ahead position with a clamp device designed for towing.
  8. Place transmission in park.