LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 503 (Lubrication & Maintenance) >> Towing >> Standard Procedure - Towing >> Four Wheel Drive Towing-Rear End Lifted

Four Wheel Drive Towing-Rear End Lifted

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: ENSURE VEHICLE IS ON A LEVEL SURFACE OR THE WHEELS ARE BLOCKED TO PREVENT VEHICLE FROM ROLLING.
  1. Attach wheel lift device to front wheels.
  2. Place the transmission in neutral.
  3. Raise the front of the vehicle off the ground and install tow dollies under front wheels.
  4. Attach wheel lift device to rear wheels and raise vehicle to towing position.
  5. Attach safety chains. Route chains so not to interfere with tail pipe when vehicle is lifted.
  6. Turn the ignition switch to the OFF position to unlock the steering wheel.
    CAUTION: Do not use steering column lock to secure steering wheel during towing operation.
  7. Secure steering wheel in straight ahead position with a clamp device designed for towing.
  8. Place transmission in park.
scientia non olet · About LEMON Manuals