LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 502 (2.8L Diesel Engine (Service Information)) >> Vibration Damper >> Installation

Vibration Damper: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install vibration damper and retaining bolts. Torque bolts to 32.4 N.m. (24 ft. lbs.).
  2. Install accessory drive belt (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - INSTALLATION) .
  3. Install viscous fan and fan shroud. Refer to RADIATOR - FAN - VISCOUS .
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals