LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 502 (2.8L Diesel Engine (Service Information)) >> Oil Pressure Relief Valve >> Removal

Oil Pressure Relief Valve: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: OIL PRESSURE RELIEF VALVE REMOVAL
GC0026223Courtesy of DAIMLERCHRYSLER CORP.
1 - VM.1054
2 - OIL PRESSURE RELIEF VALVE
3 - ENGINE BLOCK
4 - OIL PUMP
  1. Remove engine oil pan (Refer to ENGINE/LUBRICATION/OIL PAN - REMOVAL) .
  2. Using special tool VM.1054, remove oil pressure relief valve from engine block. See Fig 1.