Valve Service: Inspection
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect for cracks in the combustion chambers and valve ports.
- Inspect for cracks on the exhaust seat.
- Inspect for cracks in the gasket surface at each coolant passage.
- Inspect valves for burned, cracked or warped heads.
- Inspect for scuffed or bent valve stems.
- Replace valves displaying any damage.
- Check valve spring height. See Fig 1.
| LOAD Kg | HEIGHT mm | STATE | |||
| P1 | 0.00 | H1 | 45.26 | FREE LENGTH | |
| P2 | 182-5 +10% | H2 | 38.00 | VALVE CLOSED | |
| P3 | 395+/-5% | H3 | 28.20 | VALVE OPEN | |