LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 502 (2.8L Diesel Engine (Service Information)) >> Cylinder Head >> Standard Procedure >> Valve Service >> Disassembly

Valve Service: Disassembly

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cylinder head from the cylinder block (Refer to ENGINE/CYLINDER HEAD - REMOVAL) .
  2. Use Valve Spring Compressor Tool and compress each valve spring.
  3. Remove the valve locks, retainers, and springs.
  4. Use a smooth stone or a jewelers file to remove any burrs on the top of the valve stem, especially around the groove for the locks.
  5. Remove the valves, and place them in a rack in the same order as removed.
scientia non olet · About LEMON Manuals