LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 502 (2.8L Diesel Engine (Service Information)) >> Camshaft(S) >> Installation >> Installation - Camshafts >> Notes

Installation - Camshafts: Notes

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate camshafts with Mopar® Engine Oil Supplement, or equivalent.
  2. Carefully install camshafts into access holes in rear of cylinder head cover/intake manifold.
  3. Install thrust washer, snap ring, and camshaft oil seal. See Figure.
scientia non olet · About LEMON Manuals