LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 501 (3.7L Engine (Service Information)) >> Structural Cover >> Removal

Structural Cover: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise vehicle on hoist.
  2. Remove the bolts retaining structural cover. See Fig 1.
  3. Remove the structural cover.
Fig 1: Structural Dust Cover Removal/Installation
GC0003786Courtesy of DAIMLERCHRYSLER CORP.
1 - BOLT
2 - BOLT
3 - BOLT
scientia non olet · About LEMON Manuals