LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 501 (3.7L Engine (Service Information)) >> Pump - Engine Oil >> Disassembly

Pump - Engine Oil: Disassembly

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove oil pump cover screws and lift off cover plate.
  2. Remove pump inner and outer rotors.
    NOTE: Once the oil pressure relief valve, cup plug, and pin are removed, the pump assembly must be replaced.
  3. If it is necessary to remove the pressure relief valve, drive the roll pin from pump housing and remove cup plug, spring and valve.
scientia non olet · About LEMON Manuals