LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 500 (2.4L Engine (Service Information)) >> Valve Springs >> Removal >> Removal - Cylinder Head Off

Removal - Cylinder Head Off

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. With cylinder head removed from cylinder block, compress valve springs using a universal valve spring compressor.
  2. Remove valve retaining locks, valve spring retainers, valve stem seals and valve springs.
  3. Before removing valves, remove any burrs from valve stem lock grooves to prevent damage to the valve guides.  Identify valves, locks and retainers to insure installation in original location.
  4. Inspect the valves. (Refer to ENGINE/CYLINDER HEAD/VALVE SPRINGS - INSPECTION) 
scientia non olet · About LEMON Manuals