LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 500 (2.4L Engine (Service Information)) >> Timing Belt Cover(S) >> Removal >> Rear Cover

Rear Cover

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front covers.
  2. Remove timing belt. (Refer to ENGINE/VALVE TIMING/TIMING BELT/CHAIN AND SPROCKETS - REMOVAL) 
  3. Hold camshaft sprocket with Special Tool 6847 while removing center bolt.
  4. Remove timing belt idler pulley.
  5. Remove rear cover fasteners and remove cover from engine.
scientia non olet · About LEMON Manuals