LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 500 (2.4L Engine (Service Information)) >> Timing Belt And Sprocket(S) >> Installation >> Crankshaft Sprocket

Crankshaft Sprocket

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The crankshaft sprocket is set to a predetermined depth from the factory for correct timing belt tracking. If removed, use of Special Tool 6792 is required to set the sprocket to original installation depth. An incorrectly installed sprocket will result in timing belt and engine damage.
  1. Install crankshaft sprocket using Special Tool 6792. See Fig 1.
    Fig 1: Crankshaft Sprocket - Installation
    GC0021221Courtesy of DAIMLERCHRYSLER CORP.
    1 - SPECIAL TOOL 6792
    2 - TIGHTEN NUT TO INSTALL
  2. Install timing belt. (Refer to ENGINE/VALVE TIMING/TIMING BELT/CHAIN AND SPROCKETS - INSTALLATION) 
scientia non olet · About LEMON Manuals