LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 500 (2.4L Engine (Service Information)) >> Rocker Arms >> Installation

Rocker Arms: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate rocker arm with clean engine oil.
  2. Using Special Tools 8215 and 8436 slowly depress valve assembly until rocker arm can be installed on the hydraulic lifter and valve stem.
  3. Repeat installation procedure for each rocker arm.
  4. Install spark plugs.
  5. Install fuel rail. (Refer to FUEL SYSTEM/FUEL DELIVERY/FUEL RAIL - INSTALLATION)
  6. Install cylinder head cover. (Refer to ENGINE/CYLINDER HEAD/CYLINDER HEAD COVER(S) - INSTALLATION) 
scientia non olet · About LEMON Manuals