LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 500 (2.4L Engine (Service Information)) >> Oil Pump >> Assembly

Oil Pump: Assembly

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble pump, using new parts as required. Install the inner rotor with chamfer facing the cast iron oil pump cover. 
  2. Prime oil pump before installation by filling rotor cavity with engine oil.
  3. Install cover and tighten fasteners to 12 N.m (105 in. lbs.).
    CAUTION: Oil pump pressure relief valve must be installed correctly or serious engine damage may occur.
  4. Install relief valve, spring, gasket and cap. Tighten cap to 41 N.m (30 ft. lbs.).
scientia non olet · About LEMON Manuals