LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 500 (2.4L Engine (Service Information)) >> Exhaust Manifold >> Installation

Exhaust Manifold: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the manifold mating surfaces.
  2. Install exhaust manifold with a new gasket. Tighten attaching nuts to 20 N.m (175 in. lbs.).
  3. Attach exhaust pipe to exhaust manifold and tighten fasteners to 37 N.m (27 ft. lbs.).
  4. Install and connect the oxygen sensor. (Refer to OXYGEN SENSOR )
  5. Install the heat shield.
  6. Install the air cleaner bracket.
scientia non olet · About LEMON Manuals