LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 500 (2.4L Engine (Service Information)) >> Cylinder Head Cover >> Removal

Cylinder Head Cover: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove intake manifold. (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - REMOVAL) 
  2. Remove ignition coil and spark plug wires.
  3. Disconnect PCV and make-up air hoses from cylinder head cover.
  4. Remove cylinder head cover bolts.
  5. Remove cylinder head cover from cylinder head.
scientia non olet · About LEMON Manuals