LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 500 (2.4L Engine (Service Information)) >> Camshaft(S) >> Standard Procedure >> Standard Procedure - Camshaft End-Play

Standard Procedure - Camshaft End-Play

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Oil camshaft journals and install camshaft WITHOUT  cam follower assemblies. Install rear cam caps and tighten screws to specified torque.
  2. Using a suitable tool, move camshaft as far rearward as it will go.
  3. Zero dial indicator. See Fig 1.
  4. Move camshaft as far forward as it will go.
  5. Record reading on dial indicator. For end play specification, (Refer to ENGINE - SPECIFICATIONS) .
  6. If end play is excessive, check cylinder head and camshaft for wear; replace as necessary.
Fig 1: Camshaft End Play - Typical
GC0021192Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals