LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 500 (2.4L Engine (Service Information)) >> Air Cleaner Housing >> Installation

Air Cleaner Housing: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the air cleaner housing in vehicle.
  2. Push down on the housing to engage the locking grommets.
  3. Install mounting nut. Torque to 10 N.m (88 in. lbs.)
  4. Install vent tube.
  5. Install the air cleaner element.
  6. Position housing cover into housing locating tabs.
  7. Pry up spring clips and lock cover to housing.
  8. Install the air outlet tube.
  9. Connect air intake duct.
  10. Connect the mass airflow sensor connector
scientia non olet · About LEMON Manuals