LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 500 (2.4L Engine (Service Information)) >> Air Cleaner Element >> Removal >> Removal - 2.4L

Removal - 2.4L

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

Housing removal is not necessary for element (filter) replacement.

  1. Disconnect air intake duct at side of element cover.
  2. Pry up 2 spring clips from front of housing cover (spring clips retain cover to housing).
  3. Release housing cover from locating tabs located on rear of housing, and remove cover.
  4. Remove air cleaner element (filter) from housing.
  5. Clean inside of housing before replacing element.
scientia non olet · About LEMON Manuals