LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 500 (2.4L Engine (Service Information)) >> Air Cleaner Element >> Installation >> Installation - 2.4L

Installation - 2.4L

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install element into housing.
  2. Position housing cover into housing locating tabs.
  3. Pry up spring clips and lock cover to housing.
  4. Connect air intake duct.

If any air filter, air resonator, air intake tubes or air filter housing clamps had been loosened or removed, tighten them to 5 N.m (40 in. lbs.) torque.

scientia non olet · About LEMON Manuals