Brakes - Base: Rotors: Removal: Rear
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - CALIPER |
| 2 - ROTOR |
| 3 - OUTBOARD DISC BRAKE PAD |
- Raise and support the vehicle
- Remove the tire and wheel assembly. See Fig 1.
- Remove the disc brake caliper (1) and pads (3), (Refer to BRAKES/HYDRAULIC/MECHANICAL/DISC BRAKE CALIPERS - REMOVAL) . See Fig 1.
- Remove the retaining clips and rotor assembly.