Brakes - Base: Pedal: Operation
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - MASTER CYLINDER ASSEMBLY |
| 2 - BRAKE BOOSTER |
| 3 - CLIP |
| 4 - BRAKE PEDAL |
| 5 - BOOSTER ROD |
The brake pedal(4) is attached to the booster push rod (5). When the pedal is depressed, the primary booster push rod (5) is depressed which move the booster secondary rod. The booster secondary rod depress the master cylinder piston (1). See Fig 1.