Brakes - Base: Pedal: Description
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - MASTER CYLINDER ASSEMBLY |
| 2 - BRAKE BOOSTER |
| 3 - CLIP |
| 4 - BRAKE PEDAL |
| 5 - BOOSTER ROD |
A suspended-type brake pedal (4) is used, the pedal pivots on a shaft mounted in the steering column support bracket. The bracket is attached to the dash panel. The unit is serviced as an assembly, except for the pedal pad. See Fig 1.