Disc Brake Calipers: Removal: Front
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - DISC BRAKE CALIPER |
| 2 - CALIPER SLIDE MOUNTING BOLTS |
| 3 - BRAKE HOSE |
| 4 - BANJO BOLT |
| 5 - CALIPER ADAPTER MOUNTING BOLT |
- Install prop rod on the brake pedal to keep pressure on the brake system.
- Raise and support vehicle.
- Remove front wheel and tire assembly.
- Remove the brake hose banjo bolt (4) if replacing caliper. See Fig 1.
- Remove the caliper mounting slide pin bolts (2). See Fig 1.
- Remove the caliper (1) from vehicle.