LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 497 (HVAC Systems) >> Plumbing >> Cabin Heater >> Installation

Cabin Heater: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the viscous heater onto the mounting bracket.
  2. Install the bolts that secure the viscous heater to the bracket. Tighten the bolts to 33 N.m (25 ft. lbs.).
  3. Connect the wiring harness connector to the viscous heater clutch.
  4. Install the heater hoses to the viscous heater connections.
  5. Install the heater hose clamps to viscous heater connections.
  6. Install the engine accessory drive belt (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - INSTALLATION) .
  7. Refill the engine cooling system (Refer to COOLING ).
  8. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals