LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 497 (HVAC Systems) >> Controls >> Vacuum Check Valve >> Installation

Vacuum Check Valve: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Note the orientation of the check valve in the vacuum supply line.
  1. Connect the vacuum check valve to the vacuum actuator supply line connector located on the passenger side of the vehicle, behind the glove box.
  2. Connect the HVAC vacuum supply line connector to the vacuum check valve.
scientia non olet · About LEMON Manuals