LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 497 (HVAC Systems) >> Controls >> RECIRCULATION Door Actuator >> Installation

RECIRCULATION Door Actuator: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the recirculation door actuator by engaging the hole on the end of the actuator link with the hooked pin on the end of the recirculation door lever.
  2. Install the recirculation door actuator to the HVAC housing actuator mount.
  3. Connect the vacuum harness connector to the recirculation door actuator.
  4. Install the instrument panel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL ASSEMBLY - INSTALLATION) .
  5. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals