Vapor Canister: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: EVAP Canister Location

Courtesy of DAIMLERCHRYSLER CORP.

1 - EVAP CANISTER

2 - BOLT, CANISTER-TO-MOUNTING-BRACKET

3 - BOLTS, MOUNTING BRACKET-TO-BODY

4 - MOUNTING BRACKET

5 - LEFT/REAR SPRING PERCH

The EVAP canister (1) is located near front of fuel tank and next to the left/rear spring perch (5). See Fig 1.

Raise vehicle.
Disconnect vacuum hoses/lines at EVAP canister. Note location of lines before removal.
Remove EVAP canister (1) and mounting bracket assembly (4) from body (2 bolts). See Fig 1.

Remove canister-to-mounting bracket bolt (2). See Fig 1.

Fig 2: EVAP Canister Mounting Pins

Courtesy of DAIMLERCHRYSLER CORP.

1 - MOUNTING PINS

2 - MOUNTING BRACKET

3 - EVAP CANISTER

Slide 2 canister mounting pins (1) from mounting bracket (2). See Fig 2.