Pump-Natural Vac Leak Detection: Removal
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - FUEL PUMP MODULE LOCK RING | 4 - EVAP CANISTER |
| 2 - FUEL PUMP MODULE | 5 - NVLD PUMP |
| 3 - ISOLATOR SLEEVE | 6 - FUEL TANK |
The NVLD pump (5) is located at the front of the fuel tank. See Fig 1.
- Raise and support vehicle.
- If equipped, remove fuel tank skid plate.
- Disconnect electrical connector at pump.
- Carefully remove vapor/vacuum hoses at pump.
- The NVLD pump snaps on to a mounting bracket. Press on release tab while sliding pump from bracket.