LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 496 (Emissions Control System) >> Evaporative Emissions >> PCV Valve >> Removal >> 2.4L

PCV Valve: Removal: 2.4L

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

The PCV valve is attached to the left/front side of the valve cover. See Figure. It is secured with 1 bolt. An o-ring is used to seal valve to valve cover. See Figure.

  1. Remove hose from valve. See Figure. Check condition of hose.
  2. Remove 1 bolt.
  3. Remove PCV valve from valve cover.
  4. Check condition of valve o-ring.