LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 496 (Emissions Control System) >> Evaporative Emissions >> EVAP/Purge Solenoid >> Installation

EVAP/Purge Solenoid: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Slip EVAP canister purge solenoid onto its mounting bracket.
  2. Connect vacuum harness to solenoid.
  3. Connect electrical connector to solenoid.
scientia non olet · About LEMON Manuals