LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 495 (Engine Cooling System & Automatic Transmission Cooling System) >> Transmission >> Trans Cooler >> Installation

Trans Cooler: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position transmission cooler in vehicle.
  2. Install transmission mounting bolts. Tighten to 14 N.m (123 in. lbs.)
  3. Install transmission cooler lines into cooler (Refer to COOLING/TRANSMISSION - STANDARD PROCEDURE) .
  4. Install electric cooling fan (Refer to COOLING/ENGINE/RADIATOR FAN - INSTALLATION) .
scientia non olet · About LEMON Manuals