LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 495 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> Radiator Fan - Electric >> Installation >> 2.4L Engine

2.4L Engine

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install fan shroud assembly into the vehicle. Tighten fan shroud to radiator bolts to (5.5 N.m (50 in. lbs.).
  2. Connect fan motor wire connector to harness connector, and attach connector to shroud.
  3. Connect battery negative cable.
  4. Start engine and check fan operation.
scientia non olet · About LEMON Manuals